H.265 HDMI Video Streaming Encoder Video Converter Live Broadcast OSD Rolling

Description

H.264/H.265 SRT HD Video Encoder IPTV Encoder
Support the OSD rolling
Overview
IP output over UDP (Unicast / Multicast)  –
Transfer trough LAN
Technical Specifications:
VIDEO Encoding
-
-Video Compression: H.264 / AVC /  High Profile Level 1.5/H.265
–Video Inputs: 1 x HDMI 1.3a version (support HDCP protocol)
–Resolution:
—–HDMI  main stream:
1920×1080, 1680×1056, 1280×720, 1024×576, 850×480, 720×576, 720×540, 720×480,
720×404, 704×576, 640×480, 640×360, auto
—–HDMI  sub-stream:
1280×720, 800×450, 720×576, 720×540, 720×480, 720×404, 704×576, 640×480,
640×300, 352×288, 320×240, 320×180, auto
–Bit-rate: 16kbps-12Mbps, CBR/VBR
–Video pre-processing: Noise reduction, Sharpen, Filtering
AUDIO Encoding
–Audio compression: AAC, MP3
–Sampling rate: Adaptive, selectable of re-sample.
–Sampling accuracy: 24-bit
–Bit Rate: 48k,64k,96k,128k,160k,192k,256k
–Re-sample:32k, 44.1k
IP Encapsulation output
–Transport protocol: TS over IP output, RTSP / HTTP / UDP or RTMP/SRT protocol
–For each HDMI (SDI) to IP output (HTTP / RTSP / UDP / RTMP/SRT  protocol) 3 group out with higher resolution(up to 1080P) for large screen application.
–Output : RJ45, 100/1000M Full
SRT can realize point-to-point video transmission directly in the Internet, and can realize safe, reliable and low-latency high-definition network video transmission and distribution in a complex Internet environment, between multiple locations.
It may replace RTMP in the future. The difference with RTMP is:
1. SRT supports AES encryption, so it is more secure than RTMP
2. SRT uses FEC correction technology, so it is more stable than RTMP transmission
3. SRT is based on UDT protocol and solves the problem of high transmission delay of UDT protocol and does not require server to forward. So it has a lower delay than RTMP, which can reach less than 200ms.
3. SRT supports H.265 algorithm, so under the same video quality, it occupies smaller bandwidth than RTMP.
GENERAL OPTION
–Power supply Voltage: 110VAC±10%, 50/60Hz; 220VAC±10%, 50/60Hz
–DC Power input: 12V or 5V by Micro-USB
–Consumption: less than 40W
–Operating temperature: 0–45°C (operation), -20–80°C (storage)
–Dimensions: 146mm(W)x140mm(D)x27mm(H)
–Package Dimensions: 165mm(W)x112mm(D)x70mm(H)
–Package Weight: 0.65KG
Appearance and Illustration
Front
Panel:
1. RJ45 100M / 1000M IP Output
2. 3.5mm Stereo Audio Line in
3. HDMI Video in
4. Status LED / Power LED
5. Reset to Factory
Rear Panel:
1. This model (
FBE200-H.264-LAN ) doesn't have the port
2. Micro-USB power in 5V
3. DC Power in 12V
Network Management System
Network management system is applied to control and manage parameters and setting, etc. It centralizes encoders through network easy
Packing List:
1pcs          FBE200 LAN  IPTV streaming encoder HDMI in
1pcs           HDMI Cable
1pcs           3.5mm to RCA female (L-R)
1pcs           110V / 220V to 12V Power supply
1pcs           User Manual