Graymill Mil-Spec Rotary Switch M3786/35-063, 4 Position, 1 Pole, 220 Vac

Description

Graymill Mil-Spec Rotary Switch M3786/35-063, 4 Position, 1 Pole, 220 Vac
CONTACT LOAD CURRENT RATING
(CTHF) 150.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
CONTACT LOAD CURRENT RATING
(CTHF) 200.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL AND 30.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL AND 100.0 MILLIAMPERES LAMP LOAD DC AT SEA LEVEL
CONTACT SWITCHING ACTION
(CSHW) MAKES BEFORE BREAKS SINGLE SECTION FRONT
CONTACT VOLTAGE RATING IN VOLTS
(CQMK) 115.0 AC AT SEA LEVEL
CONTACT VOLTAGE RATING IN VOLTS
(CQMK) 28.0 DC AT SEA LEVEL
FIRST FLAT LENGTH
(ABNB) 0.250 INCHES NOMINAL SINGLE ACTUATOR
FLAT HEIGHT
(ABNC) 0.093 INCHES NOMINAL SINGLE ACTUATOR
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION
(ABFE) EXPLOSION PROOF AND MOISTURE RESISTANT
INDIVIDUAL SECTION QUANTITY
(AFBH) 1
MOUNTING METHOD
(AXGY) THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE
(CQJX) 0.250 INCHES SINGLE MOUNTING FACILITY
NONTURN DEVICE TYPE
(AFDC) FLATTED BUSHING AT 9:00 O'CLOCK
NONTURN DEVICE TYPE
(AFDC) FLATTED BUSHING AT 3:00 O'CLOCK
OVERALL DIAMETER
(ADAV) 0.562 INCHES NOMINAL
OVERALL LENGTH
(ABHP) 1.162 INCHES NOMINAL
SHAFT DIAMETER
(ABWV) 0.125 INCHES NOMINAL SINGLE ACTUATOR
SHAFT TYPE
(CRSJ) ROUND, FLATTED SINGLE ACTUATOR
SHAFT LENGTH
(ABXF) 0.375 INCHES NOMINAL SINGLE ACTUATOR
POLE QUANTITY
(AKPX) 1 SINGLE SECTION FRONT
THROW QUANTITY
(AKPY) 4 SINGLE SECTION FRONT
SPECIFICATION/STANDARD DATA
(ZZZK) 81349-MIL-S-3786/35 GOVERNMENT SPECIFICATION
STYLE DESIGNATOR
(STYL) SNAP OR LINE
SWITCH ACTUATOR INDEXING POSITION QUANTITY
(CRJH) 4 SINGLE ACTUATOR
SWITCH ACTUATOR POSITIONING INCREMENT
(CSLC) 30.0 DEGREES SINGLE ACTUATOR
SWITCH ACTUATOR STOP DEVICE TYPE
(CTDN) FIXED STOP SINGLE ACTUATOR
SWITCH CONTACT BASIC DESIGN
(AJZE) NONPILE-UP SYMMETRICAL
TERMINAL TYPE
(CSCF) PRINTED CIRCUIT
TEST DATA DOCUMENT
(TEST) 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS
(AAJD) 2A SINGLE MOUNTING FACILITY
THREAD LENGTH
(AASA) 0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR
(THSD) UNF SINGLE MOUNTING FACILITY
C4J