Gefen pro HDMI to 3GSDI Scaler, GEF-HD-2-3GSDIS

Description

Up for option is one scaler, it comes with a Remote control
These are essential when you need to go from HDMI to
a
n HDSDI production switcher as they will scale to the right resolution and frequency (not just convert) Condition is Used. (Note: item may vary slightly from photo) Shipping to the lower 48 plus international program only.
Thanks
The GefenPRO GEF-HD-2-3GSDIS is a HDMI to 3GSDI Scaler. The GefenPRO HDMI to 3GSDI Scaler converts from HDMI source to single link or dual link SDI formats on the output. Resolutions scaled up to 1080p, 1920x1200 and 2K with genlock and up to 8 channels of audio is supported. The built-in S/PDIF audio output can be used to send digital audio to a separate A/V receiver. This product uses the VXP scaler which provides high-performance scaling plus additional features: Adaptive video interlacing with edge interpolation, advanced noise reduction, alpha blending, image enhancement, and a fully-integrated menu system. This product supports SDI, HD-SDI, and 3G-SDI SMPTE 425-A and 425-B formats. The GefenPRO HDMI to 3GSDI Scaler provides superior 3G-SDI video packaged in a single rack mount unit with an internal power supply.
How It Works
Connect a Hi-Def source to the GefenPRO HDMI to 3GSDI Scaler with the supplied HDMI cable. Connect the 3G-SDI device to the BNC video connectors on the output. Use another coax cable to connect an external clock to the Reference-In BNC connector. Connect a digital audio cable between the S/PDIF connector on the product and the A/V receiver. Apply power to the source and 3G-SDI device and apply power to the product. The Hi-Def source will be converted to 3G-SDI. Use the IR remote control unit to navigate the built-in menu system to control the scaling features on the 3G-SDI output.
*Note: Supported HDMI Features:
225 MHz Video Bandwidth
10-bit Deep Color
x.v.Color
Up to 8 channels of PCM audio embedded into HDMI
Dolby Digital/DTS ACE3 encoded audio
Gefen GEF-HD-2-3GSDIS Backview
Features:
Supports resolutions up to 1080p, 1920x1200 and 2K
10-bit resolution for greater precision and dynamic range
Proprietary 10-bit motion adaptive video de-interlacing with edge interpolation for HD / SD formats
Supports 8 channel PCM audio and Dolby Digital/DTS AC3 encoded audio
3G-SDI (SMPTE 424M/425M, up to 3.0 Gbps)
HD-SDI (SMPTE 292M, up to 1.485 Gbps)
SDI (SMPTE 259M, up to 360 Mb/s)
Supports 3G-SDI SMPTE 425-A and 425-B (4:2:2 only)
Advanced noise reduction and detail enhancement
Fully integrated sprite based multi-plane OSD controller
Frame rate conversion to / from any refresh rate
Pattern mode with color bars and cross hatch patterns
Color Correction
Noise Reduction
RS-232 Control
IR Control
Internal Power Supply
Field-upgradeable firmware using USB
Genlock support
Rack-mountable